Festool - accessories for cutting
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Festool | The ø168/20 mm Z16 WZ plunge-cut saw blade with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 20° is ideal for fast longitudinal cuts in solid wood with minimal effort.
Festool | The saw blade ø168/20mm Z28 WZ for plunge saws TS 60, with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 15° is ideal for universal cutting of various wooden materials.
Festool | Saw blade ø168/20mm Z52 FWF flat teeth with partial bevel, 1.8mm cutting width, 1.2mm body thickness and -5° negative face angle, ideal for clean cuts in aluminum profiles and plastic materials.
Festool | The saw blade ø168/20 mm sZ42 WD (Wood Diamond) for Festool TS 60 Plunge Saws is ideal for clean, burr-free cross cuts in solid wood and melanin-coated boards.
Festool | The saw blade ø168/20 mm Z52 with trapezoidal teeth (TFZ/TCG), with a cutting width of 1.8 mm and a negative face angle of -5° is ideal for clean cuts in plastic materials and laminates.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 48, Clamping angle: 5°, Tooth shape: W.
The stop slider allows precise repeated cuts up to serial production.
Easy to work at an angle.
Angle table, which is quick to set up, especially for straight saws PS(C) 400/420, PSB(C) 400/420. Insert, clamp, fine adjust the angle from +45° to -45°, place on the wooden material and cut.
- Quick, easy assembly without tools
- Precise angle adjustment from +45° to -45° thanks to fine adjustment
- In conjunction with the original table, always at right angles, as no repositioning is necessary
- for angular cuts from +45° to -45°
- smooth angle adjustment
Package contents: 5 for PS 300, PSB 300.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Clamping hole Ø: 30 mm, Number of teeth: 48, Clamping angle: 10, Tooth shape: W.
Max. cutting length when dripping: 920 for CS 70.
Max. cutting length when dripping: 650 for CS 70.
Aluminium/Plastics. For cutting aluminium composite plates, non-ferrous metals, copper, brass, fibres and fabrics bonded with phenolic resins, hard plastics, hard PVC, Plexiglas, aluminium plates, aluminium profiles. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Saw blade with trapezoidal flat teeth (TF). In a trapezoidal tooth, the edges of the teeth are bevelled on both sides. It cuts into the material alternately with a flat tooth. This tooth shape is used for cutting aluminium, hard plastics and hard coated materials. Specifications.
Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 18, Clamping angle: 25°, Tooth shape: W.
Max. cutting width in longitudinal cutting: 680 for CS 70.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Diameter: 225 mm, Clamping diameter. 30, Number of teeth: 32, Clamping angle: 20, Tooth shape: W.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Abrasive Materials. For cutting cement and gypsum chipboard and fibreboard. Ideal in combination with the TS 55 F and TSC 55 K submersible saws
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts
Versatile use of the HK 85 handheld circular saw as a grooving cutter thanks to the easy mounting of the saddle head. High surface quality and fast workflow thanks to rotating knives and carbide pre-cutting knives. Intermediate rings allow adjustment of the desired groove width
Laminates/HPL. For cutting coated boards, laminate panels, melamine boards (Trespa ®), mineral materials, fibres and fabrics bonded with phenolic resins. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Wood Fine Cut. For clean, burr-free cross cuts in solid wood and on coated or veneered boards. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
All PS 400/420 accessories clearly and conveniently in Systainer
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 12, Clamping angle: 20°, Tooth shape: PW.
Technical data: diameter: 190 mm, Cutting width / blade thickness: 2,6 mm, Average clamping diameter. fF, Number of teeth: 16, Clamping angle: 28, Tooth shape: PW.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Diameter: 225 mm, Clamping diameter. 30 mm, Number of teeth: 18, Clamping angle: 28, Tooth shape: PW.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Vytvořil Shoptet