Accessories for saws
We offer quality accessories for electric saws. Here you will find, for example, drip rails and stops or angled or parallel stops.
Precision angular stop Festool FS-WA/90° is milled in one piece for precise 90° cuts. Quick and easy connection to the guide rail without adjustment.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Abrasive Materials. For cutting cement and gypsum chipboard and fibreboard. Ideal in combination with the TS 55 F and TSC 55 K submersible saws
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts
Versatile use of the HK 85 handheld circular saw as a grooving cutter thanks to the easy mounting of the saddle head. High surface quality and fast workflow thanks to rotating knives and carbide pre-cutting knives. Intermediate rings allow adjustment of the desired groove width
For clamping guide rails, for clamping workpieces on the MFT multifunction table and other applications.
Laminates/HPL. For cutting coated boards, laminate panels, melamine boards (Trespa ®), mineral materials, fibres and fabrics bonded with phenolic resins. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Wood Fine Cut. For clean, burr-free cross cuts in solid wood and on coated or veneered boards. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
All PS 400/420 accessories clearly and conveniently in Systainer
anti-slip profile F-HP 6.8m to prevent movement of the rail on the material
Rail clamps Mafell for clamping to material
2 pieces
Simple system of connecting the guide rails (without tools, just a coin)
The stop is equipped with a scale that allows you to make precise angular cuts.
Guide rail for plunge saws and other Mafell and Bosch saws in length 2.1m.
Fabric sleeve for guide rails Mafell up to 1.6m long
Cutting protection against chipping when cutting laminated boards on guide rails Mafell F-SS 3,4m
Set of guide rails, clutch, clamps and transport bag.
The set includes:
- 1 x guide rail F 80
- 1 x guide rail F 160
- 1 x angle stop F-WA
- 1 x F-VS coupler
- 2 x clamp F- SZ 100 mm
- housing for guide rail
Parallel stop (can be used as table extension by turning 180°) including wing screws
applicable for all circular saws except KKS 300 and KSP 40
Parallel stop incl. for straight saw P1 cc incl. trimmer for 68 mm holes.
Submersible saw guide bar, length 1.1 m
Guide rail for plunge saws and other Mafell and Bosch saws in length 3.1m.
Guide rail for plunge saws and other saws Mafell, or Bosch in length 1,6m
Chip guard for straight saw P1 cc - pack of 5
Sawblade:
- 6mm width
- 4 teeth per inch
- for arc cuts
price per piece
Sawblade:
- 6mm width
- 6 teeth per inch
- suitable for arc cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- with reverse toothing for easier retraction of the belt
- for straight cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- for straight cuts
price per piece
Saw blade for longitudinal cuts in wood or rough cutting where the quality of the cut is not important.
Universal saw blade for cutting wood, can handle longitudinal and transverse cuts, but the transverse cut will be of low quality.
Special CUnex W1 Wood saw blade for precise cuts in wood and board materials. Plate width 3mm tooth length 75mm tooth split 4
Scope of delivery:
1 x piece
Saw blade for MT 55 CC submersible saw suitable for longitudinal cuts or rough cutting
Set - guide rails, clamps and connecting part:
The set includes:
- 2 x guide rail F 160 (204365)
- 1 x connecting part F-VS (204363)
- 2 x clamp F SZ 100mm (205399)
-
housing for guide rail
Snap - and done. The KSS 80 Ec and K 85 circular saws, including the NFU 50 grooving cutter, can be easily combined with the drip rail, which is supplied in 370 mm length. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Saw blade for clean and fine cuts in DTD, LTD, HPL and other materials of this type. Also suitable for aluminium profiles and weak aluminium sheets.
Mafell | Saw blade ø 160x1.2/1.8x20 mm Z48 TFZ/TCG is ideal for precise cutting of laminate, melamine and other board materials, minimizing burrs and ensuring high quality of the cut surface.
Mafell | PSaw blade ø 162x1.2/1.8x20 Z48 WZ/ATB for proper pre-cutting function in the MT 55 saw and precise cutting of laminate and other board materials without burrs.
Piher Quick T-track is designed for most guide rails(Festool, Makita, DeWalt, Triton, Parkside, Asist).
Vytvořil Shoptet