Festool - accessories for TS submersible saws
festool submersible saw - accessories
Tool change in seconds. Cable replacement without any problem. Perfect and stable connection thanks to bayonet lock.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z16 WZ mm Z16 WZ for plunge saws with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 20° is ideal for fast longitudinal cuts in solid wood with minimal effort.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z28 WZ for TS 60 plunge-cut saws, with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 15°, is ideal for universal cutting of various wooden materials.
Festool | Saw blade ø 168x1.2/1.8x20 mm sZ42 WD (Wood Diamond) for Festool TS 60 plunge-cut saws is ideal for clean, burr-free cross cuts in solid wood and boards with a melanin finish.
Wood Fine Cut. For clean, burr-free cross cuts in solid wood and on coated or veneered boards. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 48, Clamping angle: 5°, Tooth shape: W.
Aluminium/Plastics. For cutting aluminium composite plates, non-ferrous metals, copper, brass, fibres and fabrics bonded with phenolic resins, hard plastics, hard PVC, Plexiglas, aluminium plates, aluminium profiles. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 18, Clamping angle: 25°, Tooth shape: W.
Abrasive Materials. For cutting cement and gypsum chipboard and fibreboard. Ideal in combination with the TS 55 F and TSC 55 K submersible saws
Laminates/HPL. For cutting coated boards, laminate panels, melamine boards (Trespa ®), mineral materials, fibres and fabrics bonded with phenolic resins. Ideal in combination with the TS 55 F, TSC 55 K as well as the HK 55 and HKC 55 - for precise, efficient work
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Technical data: diameter: 160 mm, Cutting width / blade thickness: 2,2 mm, Hole Ø: 20 mm, Number of teeth: 12, Clamping angle: 20°, Tooth shape: PW.
Vytvořil Shoptet