FastCap | Magnetic pads
Code: 04151Related products

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.
Use type 3 (without copy bearing) 4B (with copy bearing).

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

CMT Disc for discs D100x8 d22 Z4 R30 HM
Resins, knots and other unsightly wood defects are no longer a problem. The incisions are virtually invisible thanks to the fit of the clearance boats.
Product detailed description
Introducing Mag Shims - magic shims that will completely change the way you work with table saws and drills. These innovative magnetic shims are designed to save you time and effort when adjusting the blade height and side guide spacing on your table saw. And that's not all! Mag Shims are also ideal for depth adjustment on drills.
Thanks to its unique magnetic properties, the Mag Shims easily attach together, allowing you to achieve the perfect setup in seconds. No more complicated measurements or lengthy adjustments - with Mag Shims you can set up your instruments quickly and easily.
- The metric set includes six 2mm thick washers and two 1mm steel spacers.
- Quick and easy adjustment: the Mag Shims allow you to quickly and easily adjust the blade height and side guide spacing on table saws, as well as the depth on drills.
- Magnetic Properties:Thanks to its magnetic properties, the Mag Shims easily attach to itself, ensuring perfect adjustment in seconds.
- Saves time and effort: with Mag Shims you save time and effort that you would otherwise have to spend on complicated measurements and lengthy adjustments.
- Universal use: the Mag Shims are ideal for use with table saws and drills, making them an essential accessory for any handyman or professional craftsman.
Additional parameters
Category: | Drilling and milling jigs |
---|---|
Weight: | 0.105 kg |

Copy ring 30 mm - standard for the production of kitchen countertop joints.
Be the first who will post an article to this item!
Be the first who will post an article to this item!