Mafell - plunge saw guide bar F 110 cm

Multifunctional plasterboard milling machine. Thanks to the very simple and precise adjustment, you can mill a " V " groove for folding corners.

Multifunctional milling machine MF 26 cc: one machine - 5 options.

Version with adjustable cutter for 15,4-25mm grooves in transport case and drip rail.

The Mafell MT 55 plunge-cut saw is a highly precise multi-talent: it can handle plunge, mitre, and angle cuts without chipping. It cuts particleboard, Multiplex, multilayer and three-layer materials, OSB, gypsum board, cement board, plywood as accurately as it cuts engineered wood, Plexiglas, aluminum, aluminum profiles, laminate and flooring.

The best machine for grooving, cutting and bending composite boards (dibond, skybond etc.)

With this router you will achieve excellent results with materials such as: solid wood, MDF, plasterboard, aluminium composite boards, sandwich materials (skybond, dibond). Folding corners in aluminium composite panels.

• The bright LED lights allow for large-scale illumination of the work area.

anti-slip profile F-HP 6.8m to prevent movement of the rail on the material

Cutting protection against chipping when cutting laminated boards on guide rails Mafell F-SS 3,4m

The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.

without batteries and charger

The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.

The NFU 50 grooving machine can be used flexibly and is versatile for various types of milling in wooden structures. Extensive special accessories expand the possibilities of use in everyday work.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.