Blades for hand saws
Choose from a wide range of circular saw blades (mafl) - for longitudinal and transverse cutting of wood, wooden boards, plastics and metals. High-strength saw blades with SK blades are suitable for cutting hard materials. For rough cuts choose discs with fewer teeth, for clean and precise cuts choose discs with more teeth. Before purchasing, make sure the blade diameter and blade bore match the specifications of your circular saw.
CMT D160x2,2 d20 Z56 ATB - for ultra-clean cross cuts in wood and wood-based materials, the alternating helical tooth ensures a perfectly clean and precise cut.
CMT saw blade D165x2,2 d20 Z56 ATB - for ultra-clean cross cuts in wood and wood-based materials, alternating helical tooth ensures clean and precise cuts.
CMT - disc for Corian and plastic ø160/20mm 48z TFZ. Ideal for precise formatting of Corian and thick-walled plastics. Trapezoidal teeth guarantee a clean and smooth cut without burrs. Suitable for artificial stone and acrylics.
This CMT Industrial 30-tooth FWF saw blade is designed for dry cutting ferrous and non-ferrous metals with high precision. The special tooth type together with high-quality carbide blades ensure excellent cutting quality and long blade life, even when working with difficult materials such as steel and cast iron.
CMT Orange XTreme saw blade with a diameter of 165/20 mm and 56 trapezoidal negative teeth, ideal for clean cuts on laminated and particleboard without pre-cutting.
The CMT saw blade ø 190 mm Z12 HW is ideal for fast longitudinal cuts in softwood and hardwood. With a low tooth count, it provides high cutting speed while maintaining quality.
CMT saw blade ø160x20 Z12 ATB - ideal for longitudinal cuts of wood and wood-based materials. With 12 teeth, it allows fast and smooth cutting, but is not designed for applications where the quality of the cutting surface is important.
CMT saw blade ø160x20 Z40 TFZ - ideal for precision cutting of laminate, non-ferrous metals and plastics. Trapezoidal teeth and negative face angle ensure a precise and clean cut, minimizing chipping of laminate and other materials.
CMT saw blade ø160x20 from 56 TFZ - ideal for ultra-clean cutting of laminate, non-ferrous metals and plastics. Trapezoidal teeth and negative face angle ensure a precise and clean cut, minimizing chipping of laminate and other materials.
CMT saw blade D165x2,2 d20 Z24 ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø160x2,2 d20 Z24 ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade D160x2,2 d20 Z28 ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT Orange saw blade ø 210/30 mm Z36 HW is designed for all-round cutting of wood materials with a good combination of speed and quality. A great choice for routine cutting.
The CMT Orange saw blade ø 190 mm Z64 HW is ideal for ultra-fine finishing cuts in wood and board materials. A great choice for smooth surfaces and precise finishes.
For transverse final cuts. Cutting of softwood, hardwood, exotic wood and wood-based materials (plywood, OSB, etc.).
CMT saw blade ultra thin ø165x1,7 mm Z36 ATB - ideal for cross cuts of wood and wood-based materials, not suitable for longitudinal cuts, except for very thin materials.
This CMT ITK diamond saw blade with 10 alternating trapezoidal and straight teeth is designed for cutting extra-hard materials such as particleboard, fiberboard, DuPont Corian®, drywall, MDF, DTD, and various sandwich panels.
This CMT ITK diamond saw blade with 4 alternating trapezoidal and straight teeth is designed for cutting extra hard materials such as cement particleboard, cement fiberboard, DuPont Corian®, drywall, MDF, DTD, and various sandwich panels.
This CMT XTreme 40-tooth TCG (trapezoidal + straight) saw blade is designed for precise and clean cuts in stainless steel and other metals. The design with a combination of trapezoidal and straight teeth minimizes burrs and ensures smooth cutting of metal materials, delivering excellent results with high surface quality.
The CMT XTreme demolition saw blade is designed for maximum durability and efficiency when cutting in demanding environments such as remodeling and demolition projects. The blade can handle up to 20 times more cuts than competing products, thanks to its solid tooth geometry and low weight, which ensures resistance to impact with metal elements in wood, such as nails.
CMT Orange saw blade ø 165 mm Z40 HW for precise and fine final cuts. The alternating helical teeth ensure a smooth, burr-free cutting surface, ideal for applications where high surface quality is important. The disc is suitable for various types of wood and wood-based materials.
The CMT Orange 56-tooth TCG (trapezoidal + straight) saw blade is designed for precise and clean cutting of laminate, plastics and non-ferrous metals. The TCG tooth geometry minimizes burrs and ensures consistent, smooth cuts, making it the ideal tool for finishing jobs with high surface quality.
CMT Orange saw blade ø 190 mm Z64 TFZ is designed for clean and precise cuts in hard materials such as laminate, plastic and aluminium. Suitable for table and mitre saws when working with abrasive materials.
CMT Orange | Universal saw blade ø 190x1,6/2,6x30 mm Z24 WZ/ATB is for fast longitudinal and transverse cuts in wooden materials. It excels in its efficiency and throughput, making it ideal for rougher cutting.
CMT Orange saw blade ø 190 mm Z12 HW is for fast longitudinal cuts in wood materials. It excels in its efficiency and throughput, making it ideal for rough cutting.
The CMT Orange saw blade ø 190 mm Z40 HW is designed for precise and smooth finishing cuts in wood and wood panels. The perfect choice for finishing with an emphasis on surface quality.
Festool | The ø168/20 mm Z16 WZ plunge-cut saw blade with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 20° is ideal for fast longitudinal cuts in solid wood with minimal effort.
Festool | The saw blade ø168/20mm Z28 WZ for plunge saws TS 60, with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 15° is ideal for universal cutting of various wooden materials.
Festool | Saw blade ø168/20mm Z52 FWF flat teeth with partial bevel, 1.8mm cutting width, 1.2mm body thickness and -5° negative face angle, ideal for clean cuts in aluminum profiles and plastic materials.
Festool | The saw blade ø168/20 mm sZ42 WD (Wood Diamond) for Festool TS 60 Plunge Saws is ideal for clean, burr-free cross cuts in solid wood and melanin-coated boards.
Festool | The saw blade ø168/20 mm Z52 with trapezoidal teeth (TFZ/TCG), with a cutting width of 1.8 mm and a negative face angle of -5° is ideal for clean cuts in plastic materials and laminates.
Saw blade for clean and fine cuts in DTD, LTD, HPL and other materials of this type. Also suitable for aluminium profiles and weak aluminium sheets.
Saw blade 162 x 1.2/1.8 x 20 mm, Z 48,WZ, for universal use in wood and board materials
Stehle | Saw blade ø160/20 mm Z48 (TFZ/TCG) is ideal for precise cuts of laminates, MDF and chipboard. The perfect choice for plunge saws and circular saws.
Stehle | Saw blade ø160/20 mm Z56 (TFZ/TCG) is ideal for precise cuts of laminates, MDF and chipboard. The perfect choice for plunge saws and circular saws.
Stehle | Saw blade ø160/20 mm Z48 - KKS, especially for precise cuts of plastic materials.
Stehle | Saw blade ø160/20 mm Z48 teeth type TR-F-FA for clean and precise cuts of plastic profiles and boards.
Stitch | Saw blade ø 216/30 mm Z30 WZ/ATB for universal cutting of solid wood and wooden materials. Alternating ground teeth provide a clean and efficient cut without excessive heat.
Stitch | Saw blade ø 216/30 mm Z60 WZ/ATB -6°with negative tooth pitch for miter saws. Clean cut of solid wood and wooden materials.
Stitch | Saw blade ø 216/30 mm Z60 WZ/ATB with positive tooth pitch for clean cuts in solid wood and wood materials. Alternating ground teeth provide a clean and efficient cut without excessive heat.
For the final transverse cuts. For cutting softwood, hardwood, exotic wood and wood-based materials (plywood, OSB etc).
Sew | Saw blade ø 160/20 mm Z48 FWS for cordless plunge saws when cutting board materials (laminate) in G3 configuration (1x flat tooth, 2x alternating teeth) and clean cross cuts in various types of wood.
Sew | Saw blade ø160/20 mm Z48 WSV -Vario is ideal for plunge saws for splitting board materials and clean cross cuts in various types of wood.
Sew | Saw blade ø 160/20 mm Z24 FWS for cordless plunge saws in G3 configuration (1x flat tooth, 2x alternating teeth) is universal for transverse and longitudinal cuts in various types of wood .
Vytvořil Shoptet