Milescraft - tool for cutting skirting boards.

• for trimming even the most difficult parts according to the template
• HW carbide cutting edges
• copy bearing on the cutter face

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Milling machine designed for precision face milling.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.

Use type 3 (without copy bearing) 4B (with copy bearing).