Proceed to cart
Customer support:+420 777 900 240[email protected]
    Currency
    CZK
    Language
    English
    Home / Workshop equipment / Templates and preparations / Milescraft | ShelfJig - template for drilling holes for shelf supports

    Milescraft | ShelfJig - template for drilling holes for shelf supports

    Code: M1343
    Action
    Not rated
    Brand: Milescraft
    Milescraf vrtací šablona na policové podpěrky použití min
    1 167 Kč
    In stock (10 pcs)
    Delivery to:
    22/11/2024
    Delivery offer

    See for yourself the quality and ease of use of the Milescraft ShelfJig for drilling shelf support holes, which guarantees accurate, fast and efficient results thanks to its solid polycarbonate construction and easy set-up.

    Detailed information

    Related products

    Milescraft | Vrták 5 mm pro šablonu na vrtání otvorů nosičů polic
    Milescraft | Drill 5 mm for template for drilling shelf carrier holes
    Currently unavailable
    329 Kč

    Spare drill bit for shablon for drilling holes for shelf carriers 5 mm.

    Code: M2332
    7070 - Pica fine dry
    Pica Fine Dry Pencil for the most precise marking with 0.9 mm tip
    In stock (>10 pcs)
    299 Kč
    New: Maximum precision without sharpening. The special ink diameter of just 0.9 mm is ideal for fine and precise marking without sharpening.

    Code: 7070
    s l1600 (1)
    Shinwa - precise Japanese square 15 cm
    Currently unavailable
    499 Kč

    Precision Japanese miter gauge Shinwa for easy and accurate measurement.

    Code: 62009
    Mafell | Akumulátorový vrtací šroubovák A12 v T- Max
    Mafell - cordless drill driver A12 in T- Max
    In stock (1 pcs)
    10 557 Kč

    MAFELL ErgoBalance Concept:

    • The cordless drilling screwdriver A 12 is optimally balanced thanks to a precise centre of gravity analysis.
    • Small, ergonomic, extremely powerful.
    Code: 91D001
    ica 70705 set na blistru pentilka pica fine dry 7070 a nahradni tuhy pica 7050 h
    New
    Pica Fine Dry - blister micropencil with a 0.9 mm tip
    In stock (6 pcs)
    439 Kč
    Maximum precision without focusing. The special ink diameter of just 0.9 mm is ideal for fine and precise marking without sharpening.

    Code: 70705
    IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)
    IGM F045 Grooving blade cutter with bearing
    In stock
    from 1 693 Kč
    Detail

    Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

    Code: F04519381
    IGM F046 Úhlová žiletková fréza HW (Fréza F 046 45° D29x8 L52 S=6)
    IGM F046 Angled blade cutter HW
    In stock (1 pcs)
    1 110 Kč
    Detail

    The cutter is designed for trimming and chamfering edges.

    Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

    Code: F04645081
    IGM F043 Ořezávací žiletková fréza s ložiskem (Fréza F 043 D19x30 L85 S=12,7 HM)
    IGM F043 Cutting blade cutter with bearing
    In stock (1 pcs)
    from 1 200 Kč
    Detail

    Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

    Code: F04319381
    IGM F044 Drážkovací fréza se zavrtávací žiletkou (Fréza F 044 D16x48,3 L111 S=12 HM)
    IGM F044 Grooving cutter with drilling blade
    In stock at the supplier, we ship within 72 hours.
    from 1 843 Kč
    Detail

    Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

    The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

    Code: F04416321
    c906s orezavaci frezy sikme zuby s loziskem 1 web
    CMT - C906 Trimming cutter, angled teeth
    In stock
    from 1 115 Kč
    Detail

    These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

    Code: C90669111
    IGM F043 Ořezávací žiletková fréza s ložiskem (Fréza F 043 D19x50 L112 S=12,7 HM)
    IGM F043 Trimming razor cutter with two bearings
    In stock at the supplier, we ship within 72 hours.
    1 452 Kč
    Detail

    Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

    Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

    Code: F04319521
    IGM F051 Žiletková fréza HW na V drážku (Fréza F 051 90° D23x11 L60 S=6,35)
    IGM F051 HW blade cutter for V groove
    In stock (1 pcs)
    607 Kč
    Detail

    Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

    Code: F05123081
    CMT C935 Falcovací fréza na polodrážku (Varianta frézy H9,5 D31,7x19 S=8 HM)
    CMT C935 Half Groove Miter
    In stock
    from 915 Kč
    Detail

    With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

    Code: C93531711
    IGM F043 Ořezávací žiletková fréza se 2 ložisky (Fréza F 043 D19x50 2B19 L110 S=12 HM)
    IGM F043 Trimming razor cutter with 2 bearings
    In stock
    from 1 454 Kč
    Detail

    Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

    Code: F04319481
    CMT C936 Úhlová fréza s ložiskem (Fréza C 936 45° D45x18 S=8 HM)
    CMT C936 Angle cutter with bearing
    In stock
    from 802 Kč
    Detail

    - HM carbide teeth.
    - Orange Teflon non-stick coating.
    - Copy bearing.


    Code: C93613011
    IGM F043 Drážkovací žiletková fréza (Varianta frézy D19x12 L45 S=8 HM)
    IGM F043 Grooving blade cutter
    In stock at the supplier, we ship within 72 hours.
    1 151 Kč
    Detail

    Milling machine designed for precision face milling.

    Code: F04319181
    Show all related products Previous product Next product

    Product detailed description

    Milescraft | ShelfJig - template pro vrtání otvorů nosičů polic

    Template for drilling holes for shelf supports

    Accuracy and repeatability: with a fixed 32 mm hole spacing and standard 37 mm or 64 mm offset, the template provides consistent and repeatably accurate results. No more measuring with a tape measure and marking with a pencil.

    Speed and efficiency: with the ability to drill up to seven holes at once and easy template movement with the included locking pins, you can quickly and efficiently create a variety of holes for shelf supports. This feature saves not only time but also effort.

    Anyone who has ever tried to make a shelving system in furniture knows how frustrating and time-consuming it can be to accurately drill holes for shelf supports. Manual measuring and marking can lead to inaccuracies, which can invalidate the entire piece of furniture. This activity requires a high degree of precision and repeatability to produce professional and aesthetically acceptable results.

    The Milescraft shelf support drilling jig is a revolutionary solution to these problems.

    Versatility: standard 32mm spacing between bushings and the possibility of offsetting the drilled holes from the edge (37 mm and 64 mm) or, with the removal of the stop bar, holes can be drilled anywhere in the surface. Thanks to its size, the product can also be used in low cabinets where conventional templates cannot be used.

    Easy to set up: the built-in centering grooves make setting the template in the right place simple and intuitive. No need to worry about misplacement or complicated setup.

    Solid and durable construction: the template is made of solid polycarbonate, which ensures its durability and resistance even with frequent use. This makes it a worthwhile investment.

    Easy handling and storage: the guide stop also serves as a drill bit holder and stop pin. The entire system is designed for maximum comfort at work.

    Transparent body to reduce errors: the transparent template body allows better visual inspection during drilling, minimizing the risk of errors and increasing the accuracy of the results.

    Versatile use: whether it' s making new furniture, adapting existing furniture or repairing, the Milescraft shelf support drilling template is suitable for a wide range of projects and materials.

    Tip for using the template with drill bushings

    The template is equipped with 1/4 inch diameter drill bushings. Although the holes for the supports are smaller (5 mm), drilling is easy thanks to the included special drill bit. This has a taper at the end to exactly 5 mm in diameter, so it is perfectly suited for drilling holes of the required size.

    Milescraft | ShelfJig - template pro vrtání otvorů nosičů polic

    Scope of delivery:

    • template
    • 1/4" drill bit
    • 1/4" drill bit tightened to 5 mm (o.b.no. M 2332 )
    • stop pin 1/4"
    • stop pin 5 mm
    • stop ring
    • Allen key

    Additional parameters

    Category: Drilling and milling jigs
    Warranty: 2 years
    Weight: 0.52 kg
    Virutex | náhradní nože pro AU 93
    Virutex | spare blades for AU 93
    In stock at the supplier, availability within 7 days
    295 Kč
    Code: 2850083

    Použití šablony na vrtání policových podpěrek

    Be the first who will post an article to this item!

    Do not fill out this field:

    Be the first who will post an article to this item!

    Do not fill out this field:

    Informace k nákupu

    Jsme tu pro vás

    Kde nás najdete

    • HZ profi tools s. r. o.
    • Přátelství 284/14A
    • 104 00 Praha-Uhříněves
    • Otevřeno pondělí–pátek 8–18

    Kontaktní údaje

    2024 © Nářadí Praha, všechna práva vyhrazena
    Vytvořil Shoptet

    We are here for you

    We are here for you

    Where to find us

    • HZ profi tools s. r. o.
    • Přátelství 284/14A
    • 104 00 Praha-Uhříněves
    • Open: Monday–friday 8–18

    Contact details

    2024 © Nářadí Praha, all rights reserved
    Vytvořil Shoptet