Festool - saw cutting and accessories
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Longitudinal and transverse cuts up to a material thickness of 85 mm. Versatile use for mitre cuts up to 60°. Cutting of beams, wooden beams and planks. Cutting of board materials, fibreboard insulation materials and sandwich panels
Longitudinal and transverse cuts up to a material thickness of 85 mm. Versatile use for mitre cuts up to 60°. Cutting of beams, wooden beams and planks. Cutting of board materials, fibreboard insulation materials and sandwich panels
Tool change in seconds. Cable replacement without any problem. Perfect and stable connection thanks to bayonet lock.
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams
Festool | Saw blade ø 168x1.2/1.8x20 mm Z16 WZ mm Z16 WZ for plunge saws with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 20° is ideal for fast longitudinal cuts in solid wood with minimal effort.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z28 WZ for TS 60 plunge-cut saws, with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 15°, is ideal for universal cutting of various wooden materials.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z52 FWF with flat teeth with partial bevel, cutting width 1.8 mm, body thickness 1.2 mm and negative rake angle -5°, ideal for clean cuts in aluminum profiles and plastic materials.
Festool | Saw blade ø 168x1.2/1.8x20 mm sZ42 WD (Wood Diamond) for Festool TS 60 plunge-cut saws is ideal for clean, burr-free cross cuts in solid wood and boards with a melanin finish.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z52 with trapezoidal teeth (TFZ/TCG), with a cutting width of 1.8 mm and a negative rake angle of -5°, is ideal for clean cuts in plastic materials and laminates.
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
The stop slider allows precise repeated cuts up to serial production.
Package contents: 5 for PS 300, PSB 300.
Longitudinal and transverse cuts up to 55 mm material thickness. Ideal for mobile use on site. Shortening of roof battens. Trimming the planks of formwork. Cutting boards. Cutting of plate material. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Longitudinal and transverse cuts up to 55 mm material thickness. Ideal for mobile use on site. Shortening of roof battens. Trimming the planks of formwork. Cutting boards. Cutting of plate material. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Longitudinal and transverse cuts up to 55 mm material thickness. Ideal for mobile use on site. Shortening of roof battens. Trimming the planks of formwork. Cutting boards. Cutting of plate material
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting cut-outs in doors and kitchen worktops. Cutting expansion joints in parquet floors and grooves. Cutting of plate material
Precise plunge cuts up to 55 mm material thickness. Cutting cut-outs in doors and kitchen worktops. Cutting expansion joints in parquet floors and grooves. Cutting of plate material
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting cut-outs in doors and kitchen worktops. Cutting expansion joints in parquet floors and grooves. Cutting of plate material
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Ideal for mobile use on the assembly site. Cutting of boards and panels up to 305 × 60 mm. Cutting of strips, profiles and prisms up to 60 mm thickness. Angularly precise adjustment of skirting boards and ceiling strips without calculation - in combination with the angle unit.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Clamping hole Ø: 30 mm, Number of teeth: 48, Clamping angle: 10, Tooth shape: W.
Max. cutting length when dripping: 920 for CS 70.
Max. cutting length when dripping: 650 for CS 70.
Saw blade with trapezoidal flat teeth (TF). In a trapezoidal tooth, the edges of the teeth are bevelled on both sides. It cuts into the material alternately with a flat tooth. This tooth shape is used for cutting aluminium, hard plastics and hard coated materials. Specifications.
Max. cutting width in longitudinal cutting: 680 for CS 70.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Diameter: 225 mm, Clamping diameter. 30, Number of teeth: 32, Clamping angle: 20, Tooth shape: W.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts
The Kapex KS 60 is the first compact mitre saw weighing just 17.8kg with ergonomic handles and precision bar guidance for maximum accuracy.
Extra class down to the last detail. Lead left, lead right. Even where others only pretend to.
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Excellent curve cutting thanks to triple blade guide and torsion-resistant lifting bar. Easy handling thanks to Softgrip handle and ergonomic design
Mobile precision cutting. Cordless table circular saw in Systainer format.
Technical data: diameter: 190 mm, Cutting width / blade thickness: 2,6 mm, Average clamping diameter. fF, Number of teeth: 16, Clamping angle: 28, Tooth shape: PW.
Technical data: diameter: 225 mm, Cutting width / blade thickness: 2,6 mm, Diameter: 225 mm, Clamping diameter. 30 mm, Number of teeth: 18, Clamping angle: 28, Tooth shape: PW.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Saw blade with alternating teeth (W and PW). The teeth of this blade are bevelled alternately left and right and cut alternately. The saw blade with alternating teeth is a universal saw blade for all wood materials. Specifications.
Vytvořil Shoptet