Tags

For carrying SYS 1 T-LOC and SYS 2 T-LOC upright.

Additional stop ZA-DF 500 only for Domino DF 500 milling machine

Adhesive pad FS-HU 10M.

Additional stop slide for LR 32 hole drilling system.

The stop slider allows precise repeated cuts up to serial production.

Technical data: length: 1400 mm.

The solution from Bessey for fixing workpieces to workbenches and workbenches with a wooden work plate with a drilled hole system. Ideal for use in combination with the MFT table from Festoolfor joinery production. With the use of an adapter, the clamps can be mounted to any table with holes from 19-30 mm (3/4" - 1 3/16").

For common use in offices, warehouses. Stapling of paper, foils, thin cartons. Sewing labels to bags.

Patented clips with a back to the canopy provide greater resistance to pulling out of the material.

The best-selling and very powerful oil compressor with a 17-litre air tank. Designed for everyday use on construction sites.

The smallest, portable, oil-free Bostitch compressor in a protective frame, suitable for pinchers and smaller pneumatic tools.

New in the range of small joinery nailers with narrow nose for precision work with BT nails from 15 - 55 mm

Powerful tool from the new range of joinery nailers Bostitch, for nails 1.6 mm thick with straight tray.

Combination nailer for wheel nails and stapler for narrow staples.

The newest stapler for narrow staples type SX.

Brand new staple hammer. Allows you to insert two staple strips at once. Large foot to prevent tearing of stapled material.

For demanding applications in offices, warehouses, production. Stapling of paper, insulating foils, fabric, cardboard, nonwovens, rubber, netting, etc.

Widely used in joinery for attaching cabinet backs due to the width of the back of the buckle, which prevents tearing of the material.

Upholstery stapler for the narrowest staples.

Package contents 10 pcs.

Technical data: weight: 1,60 kg, Length: 368 mm, Width: 115 mm, Height: 257 mm, Tray: 120 clips, Clips length: 19 and 22 mm, Outer width of the spine: 34,2 mm, Wire: Ø 1,0 x 1,9 mm, Material: painted steel, galvanized steel.

Compass KS-PS 400.

Diameter: 350 mm Cutting width / blade thickness: 2,9 mm Clamping diameter. ø: 30 mm Number of teeth: 60 Tooth shape: TFZ

Compass KS-PS 400 Set.

CMT saw blade D165x2,2 d20 Z56 ATB - for ultra-clean cross cuts in wood and wood-based materials, alternating helical tooth ensures clean and precise cuts.

The CMT Laminate Wheel Set - main wheel ø 300/30 mm Z96 TCG/TFZ + pre-cutting wheel ø 120 mm Z24 Flat offers the perfect solution for cutting laminate and chipboard without burrs thanks to the combination of main and pre-cutting wheel.

CMT Industrial saw blade 250/30 mm diameter Z80 with alternating helical teeth (WZ/ATB) and negative face angle -2°, designed for clean cuts of laminated and veneered materials without the need for pre-cutting.

CMT Orange | Saw blade ø 250/30 mm Z16 with alternating helical teeth (WZ/ATB), for fast and efficient cuts in construction timber, soft and hard wood, including materials with occasional concrete or nails.

The CMT saw blade ø 300/30 mm Z84 TCG/TFZ is the ideal choice for clean and precise cuts in compact materials such as Corian® and other thick-walled plastics where surface quality is a priority.

CMT CHROME saw blade with 250/30 mm diameter Z60 with alternating helical teeth (ATB/WZ), chrome surface and soundproofing, ideal for cross-cutting softwood and hardwood.

CMT CHROME 250/30 mm diameter Z80 saw blade with alternating bevel teeth (ATB/WZ), chrome finish and soundproofing, ideal for cross-cutting softwood and hardwood.

This CMT Industrial 30-tooth FWF saw blade is designed for dry cutting ferrous and non-ferrous metals with high precision. The special tooth type together with high-quality carbide blades ensure excellent cutting quality and long blade life, even when working with difficult materials such as steel and cast iron.

CMT Orange XTreme saw blade with a diameter of 165/20 mm and 56 trapezoidal negative teeth, ideal for clean cuts on laminated and particleboard without pre-cutting.

CMT Orange saw blade ø 216 mm Z64 TCG/TFZ is designed for clean cuts in materials such as aluminium, laminate and plastic. Suitable for table and mitre saws where precise control over the cut is required.

The CMT Orange saw blade ø 216 mm Z80 TFZ is ideal for ultra-fine cuts in hard materials such as laminate, plastic and aluminium. This blade is designed for clean, burr-free finishing cuts.

CMT Orange | Saw blade ø 250/30 mm Z80 TCG/TFZ negative -6° is designed for clean cuts in laminates, plastics and non-ferrous metals with a soundproof design for quiet operation and precise cutting.

CMT Orange | The Z80 TCG/TFZ saw blade ø 254/30 mm is designed for clean cuts in laminates, plastics and non-ferrous metals with a soundproof design for quiet operation and precision cutting.

CMT Orange | Saw blade ø 260/30 mm Z80 TCG/TFZ is designed for clean cuts in laminates, plastics and non-ferrous metals with a soundproof design for quiet operation and precise cutting.

CMT Saw blade ø 300/30 mm Z96 TCG/TFZ is designed for precise and smooth cuts of laminate, plastic and non-ferrous materials. The negative face angle ensures a gentle passage through the material without tearing.

CMT CHROME saw blade 250/30 mm diameter Z40 with alternating helical teeth (ATB/WZ), chrome surface and soundproofing, ideal for longitudinal and transverse cuts of softwood and hardwood.

The CMT saw blade ø 190 mm Z12 HW is ideal for fast longitudinal cuts in softwood and hardwood. With a low tooth count, it provides high cutting speed while maintaining quality.

CMT saw blade ø160x20 Z12 ATB - ideal for longitudinal cuts of wood and wood-based materials. With 12 teeth, it allows fast and smooth cutting, but is not designed for applications where the quality of the cutting surface is important.

CMT Orange | Saw blade ø 260/30 mm Z28 WZ/ATB is optimized for fast and efficient longitudinal cuts of solid wood with high cutting performance.

CMT saw blade D165x2,2 d20 Z24 ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.

CMT saw blade D160x2,2 d20 Z28 ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.

CMT saw blade ø210/30 mm Z24 WZ/ATB - ideal for transverse and longitudinal cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.

CMT Industrial | Saw blade ø 254/30 mm Z60 WZ/ATB with negative inclination is designed for precise cross and longitudinal cuts on mitre saws. Reduces cutting aggressiveness, minimizes kickback and ensures a smooth, burr-free cut.

CMT Orange saw blade ø 210/30 mm Z36 HW is designed for all-round cutting of wood materials with a good combination of speed and quality. A great choice for routine cutting.

The CMT Orange saw blade ø 190 mm Z64 HW is ideal for ultra-fine finishing cuts in wood and board materials. A great choice for smooth surfaces and precise finishes.

CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.

CMT | Ultra thin saw blade ø 300x1,8/2,6x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.

CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z60 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient cross cuts. Suitable for soft and hard wood, OSB and plywood.

CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z80 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient cross cuts. Suitable for soft and hard wood, OSB and plywood.

CMT | ITK Ultra thin universal saw blade ø 250x1,6/2,4x30 mm Z42 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient longitudinal and transverse cuts. Suitable for soft and hard wood, OSB and plywood.

CMT saw blade ultra thin ø165x1,7 mm Z36 ATB - ideal for cross cuts of wood and wood-based materials, not suitable for longitudinal cuts, except for very thin materials.

CMT Orange saw blade ø 216 mm Z48 HW -5° Neg is designed for precise and smooth cutting of materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.

CMT Orange wood saw blade ø 216 mm Z64 HW -5° Neg is ideal for fine and clean final cuts. Great for mitre saws where a smooth, precise, burr-free cut is required.

CMT Orange saw blade ø 216 mm Z80 HW -5° Neg is ideal for ultra fine and smooth final cuts. Perfect for mitre saws where maximum cut quality is required.

CMT Orange saw blade ø 254/30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.