Tags, Page 4
CMT Saw blade ø 300x2,2/3,2x30 mm Z96 TCG/TFZ is designed for precise and smooth cuts of laminate, plastic and non-ferrous materials. The negative face angle ensures a gentle passage through the material without tearing.
CMT Orange | Saw blade ø 254x2,5/3,2x30 mm Z80 TCG/TFZ negative for clean cuts on laminates, plastics and non-ferrous metals with soundproof construction for quiet operation and precise cutting.
CMT Orange | Saw blade ø 260x2,5/3,2x30 mm Z80 TCG/TFZ negative -6° is designed for clean cuts in laminates, plastics and non-ferrous metals with a soundproof construction for quiet operation and precise cutting.
CMT Orange | Saw blade ø 250x2,5/3,2x30 mm Z80 TCG/TFZ negative -6° for clean cuts on laminates, plastics and non-ferrous metals with soundproof construction for quiet operation and precise cutting.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z80 TFZ/TCG is ideal for ultra-fine cuts in hard materials such as laminate, plastic and aluminium. This blade is designed for clean, burr-free finishing cuts.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z64 TCG/TFZ is designed for clean cuts in materials such as aluminium, laminate and plastic. Suitable for table and mitre saws where precise control over the cut is required.
CMT Orange | Saw blade ø 190x1,6/2,8x30 mm Z64 TFZ/TCG is designed for clean and precise cuts in hard materials such as laminate, plastic and aluminium. Suitable for table and mitre saws when working with abrasive materials.
CMT Orange | Saw blade ø 165x1,6/2,2x20 mm Z56 TFZ/TCG (trapezoidal + straight for for precise and clean cutting of laminate, plastics and non-ferrous metals. The TCG tooth geometry minimizes burrs and ensures consistent, smooth cuts, making it the ideal tool for finishing jobs with high surface quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z56 TFZ/TCG - ideal for ultra-clean cutting of laminate, non-ferrous metals and plastics. Trapezoidal teeth and negative face angle ensure a precise and clean cut, minimizing chipping of laminate and other materials.
CMT saw blade ø 160x1,6/2,2x20 mm Z40 TFZ/TCG is ideal for precision cutting of laminate, non-ferrous metals and plastics. Trapezoidal teeth and negative face angle ensure a precise and clean cut, minimizing chipping of laminate and other materials.
CMT Industrial | Saw blade ø 254x1,8/2,2x30 mm Z60 WZ/ATB with negative inclination is designed for precise transverse and longitudinal cuts on mitre saws. Reduces cutting aggressiveness, minimizes kickback and ensures a smooth, burr-free cut.
CMT Orange saw blade ø 254x1,8/2,4x30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.
CMT Industrial saw blade ø 300x2,2/3,2x30 mm Z24 WZ/ATB is designed for fast and efficient longitudinal cuts with maximum stability and safety. The chip limiter and expansion grooves ensure a clean cut and minimise kickback.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z80 WZ/ATB -5° Neg is ideal for ultra-fine and clean final cuts. Perfect for mitre saws where maximum cut quality is required.
CMT Orange wood saw blade ø 216x1,8/2,8x30 mm Z64 WZ/ATB -5° Neg is ideal for fine and clean final cuts. Great for mitre saws where a smooth, precise, burr-free cut is required.
CMT Orange saw blade ø 210x1,6/2,8x30 mm Z64 WZ/ATB is ideal for fine finishing cuts in wood and board materials. This blade provides an ultra-smooth cut for a precise, high-quality finish.
CMT Orange saw blade ø 210x1,6/2,8x30 mm Z48 WZ/ATB is designed for smooth finishing cuts in wood and board materials. The perfect choice for finishing with high surface quality.
CMT Orange saw blade ø 190x1,6/2,6x30 mm Z64 WZ/ATB is ideal for ultra-fine finishing cuts in wood and board materials. A great choice for smooth surfaces and precise finishes.
The CMT Orange saw blade ø 190x1,6/2,2x30 mm Z40 WZ/ATB is designed for precise and smooth finishing cuts in wood and wooden boards. The perfect choice for finishing with an emphasis on surface quality.
CMT saw blade ø 165x1,6/2,2x20 mm Z56 WZ/ATB - for ultra-clean cross-cuts in wood and wood-based materials, alternating helical tooth ensures a clean and precise cut.
CMT Orange | Saw blade ø 165x1,6/2,2x20 mm Z40 WZ/ATB for precise and fine final cuts. The alternating helical teeth ensure a smooth, burr-free cutting surface, ideal for applications where high surface quality is important. The disc is suitable for various types of wood and wood-based materials.
CMT saw blade ø 160x1,6/2,2x20 Z56 WZ/ATB - for ultra-clean cross-cuts in wood and wood-based materials, the alternating helical tooth ensures a perfectly clean and precise cut.
CMT saw blade ø 160x1,6/2,2x20 mm Z40 WZ/ATB - for clean cross cuts in wood and wood-based materials, alternating helical tooth ensures clean and precise cuts.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of wooden materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.
The CMT Orange saw blade ø 210x1,8/2,8x30 mm Z36 WZ/ATB is designed for versatile cutting of wood materials with a good combination of speed and quality. A great choice for routine cutting.
CMT Orange | Universal saw blade ø 190x1,6/2,6x30 mm Z24 WZ/ATB is for fast longitudinal and transverse cuts in wooden materials. It excels in its efficiency and throughput, making it ideal for rougher cutting.
CMT saw blade ø 165x1,6/2,2x20 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT Orange | Saw blade ø 260x1,8/2,8x30 mm Z28 WZ/ATB is optimized for fast and efficient longitudinal cuts of solid wood with high cutting performance.
CMT saw blade ø 210x1,8/2,8x30 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT Orange | Saw blade ø 190x1,6/2,6x30 mm Z12 WZ/ATB is for fast longitudinal cuts in wooden materials. It excels in its efficiency and throughput, making it ideal for rough cutting.
The CMT saw blade ø 190x1,6/2,6x20 mm Z12 WZ/ATB is ideal for fast longitudinal cuts in softwood and hardwood. With a low tooth count, it provides high cutting speed while maintaining quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z12 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. With 12 teeth, it allows fast and smooth cutting, but is not designed for applications where the quality of the cutting surface is important.
CMT Orange | Saw blade ø 250x1,8/2,8x30 mm Z16 (WZ/ATB) with alternating helical teeth, for fast and efficient cuts in construction timber, soft and hard wood, including materials with occasional concrete or nails.
CMT CHROME 250/30 mm diameter Z80 saw blade with alternating bevel teeth (ATB/WZ), chrome finish and soundproofing, ideal for cross-cutting softwood and hardwood.
CMT CHROME saw blade ø 300x2,2/3,2x30 mm Z72 WZ/ATB is designed for clean and precise cuts in cross direction. The chrome-plated surface reduces adhesive and resin adhesion, extending the life of the disc.
CMT CHROME | Saw blade ø 250x2,2/3,2x30 mm Z60 ATB/WZ is ideal for cross-cutting softwood and hardwood.
CMT CHROME | Saw blade ø 250x2,2/3,2x30 mm Z40 with alternating helical teeth (ATB/WZ), chrome surface and soundproofing, ideal for longitudinal and transverse cuts of softwood and hardwood.
CMT saw blade ø 160x1,6/2,2x20 mm Z28 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT Orange | Saw blade ø 250x2,2/3,2x30 mm Z60 WZ/ATB is designed for precise and smooth finishing cuts in wood and wooden boards. The perfect choice for finishing with an emphasis on surface quality.
CMT Orange | Saw blade ø 250x2,2/3,2x30 mm Z40 WZ/ATB for precise and smooth finishing cuts in wood and wooden boards. The perfect choice for finishing with an emphasis on surface quality.
CMT Industrial | Saw blade ø 300x2,2/3,2x30 mm Z36 WZ/ATB is designed for universal cutting with high surface quality and reduced noise. Suitable for a combination of longitudinal and transverse cuts with efficient sawdust removal.
CMT Industrial | Saw blade ø 250x2,2/3,2x30 mm Z80 WZ/ATB with negative face angle -2°, for clean cuts of laminated and veneered materials without pre-cutting.
CMT CHROME saw blade ø 300x2,2/3,2x30 mm Z96 TCG/TFZ is ideal for clean and precise cuts in laminate, DTD and MDF. Trapezoidal teeth and chrome-plated surface ensure high cutting quality and long service life.
CMT Orange XTreme | Saw blade ø 165x1,6/2,2x20 mm Z56 TFZ/TCG with trapezoidal negative teeth, ideal for clean cuts of laminated and particleboard without pre-cutting.
The CMT Industrial saw blade ø 300x2,2/3,2x30 mm Z72 TFZ/TCG is ideal for cutting laminate and particleboard with a clean, burr-free surface thanks to the trapezoidal tooth shape. The positive angle of the tooth face contributes to a smooth passage through the material.
CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z80 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient cross cuts. Suitable for soft and hard wood, OSB and plywood.
CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z60 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient cross cuts. Suitable for soft and hard wood, OSB and plywood.
CMT | Ultra-thin saw blade ø 165x1,1/1,7x20 mm Z36 WZ/ATB - ideal for cross-cuts in wood and wood-based materials, not suitable for longitudinal cuts, except for very thin materials.
CMT | Ultra thin saw blade ø 300x1,8/2,6x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT | ITK Ultra thin universal saw blade ø 250x1,6/2,4x30 mm Z42 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient longitudinal and transverse cuts. Suitable for soft and hard wood, OSB and plywood.
CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
Laminating disc for laminated joints - D100x3,96 d22 Z6 HM alternating tooth
CMT Disc for discs D100x8 d22 Z4 R30 HM
Resins, knots and other unsightly wood defects are no longer a problem. The incisions are virtually invisible thanks to the fit of the clearance boats.
CMT ITK | Diamond saw blade ø 250x1,8/2,4x30 mm Z16 with alternating trapezoidal and straight teeth (TCG/TFZ), for cutting extra hard materials such as DuPont Corian®, cement-bonded and cement-fibreboard, MDF, DTD and plasterboard.
CMT | ITK diamond saw blade ø 160x1,8/2,4x20 mm Z4 TFZ/TCG (alternating trapezoidal and straight teeth) is designed for cutting extra hard materials such as cement-bonded particleboard, cement-fibreboard, DuPont Corian®, plasterboard, MDF, DTD, and various sandwich panels.
CMT | ITK diamond saw blade ø 160x1,8/2,4x20 mm Z10 TFZ/TCG (alternating trapezoidal and straight teeth) is designed for cutting extra hard materials such as cement-bonded particleboard, cement-fibreboard, DuPont Corian®, plasterboard, MDF, DTD, and various sandwich panels.
CMT XTreme | Saw blade ø 160x1,4/1,8x20 mm Z40 TFZ/TCG (trapezoidal + straight) for precise and clean cuts in stainless steel and other metals. The design with a combination of trapezoidal and straight teeth minimizes burrs and ensures smooth cutting of metal materials, delivering excellent results with high surface quality.
CMT Industrial | Saw blade ø 160x1,6/2,0x20 mm Z30 FWF is designed for dry cutting of ferrous and non-ferrous metals with high precision. The special tooth type together with high-quality carbide blades ensure excellent cutting quality and long blade life, even when working with difficult materials such as steel and cast iron.
CMT | Wheel for Corian and plastics ø160x1,6/2,2x20mm Z48 TFZ/TCG. Ideal for precise formatting of Corian and thick-walled plastics. Trapezoidal teeth guarantee a clean and smooth cut without burrs. Suitable for artificial stone and acrylics.
Adjustable corners for belt tensioners Bessey, for angles 60°-180°.
Packing: 6 pcs
New in the range of small joinery nailers with narrow nose for precision work with BT nails from 15 - 55 mm
Bessey - 3/4" pipe diameter joiner clamp
Supplied with 1000 mm threaded thick-walled steel pipe
If you are interested in other dimensions please contact us.
Bessey - carpenter's pipe clamp for 1/2" joint strip
Supplied with 1000 mm long threaded steel pipe.
If you are interested in other dimensions please contact us.
Angle " Blue Dog Square " allows you to draw quick lines with ease. It has 5 swivel stops built into the angle arms.
Suitable for construction carpenters.
Inch version only !!!!
Vaughan's SuperBar pry bar is an indispensable tool for every carpenter and homeowner.
Vaughan's SuperBar pry bar is an indispensable tool for every carpenter and homeowner.
Technical data:
- Light colour: 5000 K
- Bulbs: 80 x 1,4 W 8000 light_lm
- LED lifetime (L70): 10000 H
- Colour rendering index Ra: 80
- Protection class: IP 55
- Protection class: 1
- Cable length: 4.9 m
- Weight: 3.4 kg.
Scope of delivery: tripod ST DUO 200, in Systainer SYS 3 T-LOC.
The CMT saw blade ø 300x2.5/3.2x30 mm Z84 TCG/TFZ is the ideal choice for clean and precise cuts in compact materials such as Corian® and other thick-walled plastics where surface quality is a priority.
- As the world's first circular saw with bottom pull, ERIKA has been a symbol of mobile cutting since its introduction. After almost 40 years of experience, the current generation is now equipped with everything users need and expect from a modern circular saw with bottom pull.
The swivel belt guide allows right-angled cuts up to 90 mm deep without the second belt cutting into the material.
Carpentry planer with a cutting width of 248 mm
The largest carpentry planer Mafell with a 320 mm span.
MAFELL ErgoBalance Concept:
- The cordless drilling screwdriver A 12 is optimally balanced thanks to a precise centre of gravity analysis.
- Small, ergonomic, extremely powerful.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
Code: 91C102
Code: 91C101
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
without batteries and charger
We have invented a drip saw for you that works very simply and mobile. For the new KSS 40 18Mbl we have added a battery.
We have invented a drip saw for you that works very simply and mobile. For the new KSS 40 18Mbl we have added a battery.
variant without battery and charger
Want to experience versatility in a whole new dimension? Then get acquainted with LO 55. Its exemplary handling makes it ideal for all work in the workshop or on the assembly line. See the many possible uses and unleash your creativity.
The NFU 50 grooving machine can be used flexibly and is versatile for various types of milling in wooden structures. Extensive special accessories expand the possibilities of use in everyday work.
Possibility to test the demonstration machine at our shop.
Patented adjustment system with spring-loaded pins in the base plate. Proven double-hole technology prevents workpieces from turning against each other.
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
- Cuts according to the line. The cut indicator moves automatically with the set angle.
- The cutting depth can be adjusted and locked with just one lever.
- The bright LED lights allow for large-scale illumination of the work area.
Multifunctional milling machine MF 26 cc: one machine - 5 options.
Version with adjustable cutter for 15,4-25mm grooves in transport case and drip rail.
Multifunctional plasterboard milling machine. Thanks to the very simple and precise adjustment, you can mill a " V " groove for folding corners.
The best machine for grooving, cutting and bending composite boards (dibond, skybond etc.)
With this router you will achieve excellent results with materials such as: solid wood, MDF, plasterboard, aluminium composite boards, sandwich materials (skybond, dibond). Folding corners in aluminium composite panels.
The EVA 150/5 eccentric grinder offers you 20% higher speed and thus a high material removal rate. Especially suitable for large areas in woodworking.
The EVA 150 eccentric grinder offers you a 20% higher speed compared to other eccentric grinders. This increases performance and productivity.
The Mafell MT 55 plunge-cut saw is a highly precise multi-talent: it can handle plunge, mitre, and angle cuts without chipping. It cuts particleboard, Multiplex, multilayer and three-layer materials, OSB, gypsum board, cement board, plywood as accurately as it cuts engineered wood, Plexiglas, aluminum, aluminum profiles, laminate and flooring.
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines.
Do not hesitate to contact us and arrange a demonstration of the machine at your workplace.
Especially the MAFELL CUnex precision slice enables uniquely precise cuts thanks to its newly designed form.
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
Four saws in one - hand saw, bar-guided saw with movable guard, plunge saw and expansion joint saw.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
Herringbone cutter 90-12 with a 12 mm clamping shank with a diameter of 17.5 mm and an angle of 8° for board thicknesses of 16-26 mm.
The 80-8 herringbone cutter with 8 mm clamping shank with a diameter of 12.7 mm and an angle of 8° is designed for a board thickness of 12-20 mm for open toothing or 19 mm for semi-hidden zinc plating.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts
Vytvořil Shoptet