Tags, Page 5

Small, lightweight and powerful impact wrench with 225 Nm, with uby pressing the tool 1/4" inside hex, optional 2.5/5.0 Ah battery cells

Alignment slat, accessory for Clamex P10 joints Dimensions:52x19x7mm Packing (1pc)

Alignment slat, accessory for Clamex P joints Dimensions:65x27x7mm Packing (1pc)

Alignment slat, accessory for Clamex P joints Dimensions:65x27x7mm Packing (1pc)

Drilling jig for the Lamello Cabineo fastening system. The tool is designed for precise and productive manual joining of furniture parts using a drill or an electric screwdriver.

Demountable fastener that can be milled with any milling cutter (only need to have a tool with a width of 8mm) dimensions of the joint 66x29x8mm

Material: glass fibre reinforced plastic

Dimensions: 52x19x9,7 mm

Mounting tolerance: longitudinal ± 0.5 mm

Scope of delivery: 1xpair

This innovation is applicable from 13mm material thickness for butt jointing.The material thickness must be 16mm for the mitre joint

Unleash your imagination when making furniture with our unique machine Lamello ZETA P 2 , which will fulfill almost every wish. The invisible and demountable furniture joints of our P-system will surprise you with endless application possibilities.

Tenso P-10 is a unique bonding aid that eliminates the need for clamps or pullers. Tenso P-10, developed for angle (45°) from 15mm material thickness or butt joints (90°) from 12mm material thickness.

A unique helper when gluing joints. Especially useful for bonding complex structures and shapes.

Brand new Clamex P 14 Flexus

• Flexvariable positioning pins allow freely selectable mounting sequence
• Flexible positioning pins fix the workpiece and keep it in place
• Bevelled and movable positioning pins allow workpiece manipulation in both directions

Lamello - Clamex P 14 - is a flexible connecting furniture fitting for quick assembly without tools. It opens up completely new design possibilities for architects, designers, engineers and furniture manufacturers. Until now your ideas have been limited by the technical possibilities of the connections, now you can let your imagination run wild.

Lamello - Clamex P 14 - is a flexible connecting furniture fitting for quick assembly without tools. It opens up completely new design possibilities for architects, designers, engineers and furniture manufacturers. Until now your ideas have been limited by the technical possibilities of the connections, now you can let your imagination run wild.

Demontovatelný spojovací prvek pro 4mm drážku vytvořenou jakoukoli lamelovací frézkou.

Revoluční spojovací systém Clamex S-20 od Lamello přináší profesionální řešení pro montáž rozebíratelného nábytku bez použití lepidla. Jeho největší výhodou je, že 4mm drážku pro tento spoj vytvoříte jakoukoliv lamelovací (štěrbinovou) frézkou - není potřeba žádné speciální nářadí. Díky inovativnímu pákovému mechanismu umožňuje rychlé sestavení nebo demontáž nábytku, přičemž zachovává maximální pevnost spoje. Minimalistický design s pouhým 6mm otvorem zajišťuje dokonalý estetický vzhled vašeho nábytku.

New from Lamello, self-clinching retractable shelf joint

Material: glass fibre reinforced plastic

Cutter: 100x7x22mm

Dimensions: 65x16x9,7mm

Mounting tolerance: +/- 1mm

A unique product from the brand Leigh for producing dovetail joints exactly according to your wishes.With this product you will no longer be limited by anything and you will choose exactly the size and pitch that you like

Including suction milling holder VRSD24

A unique product from Leigh for making herringbone joints exactly to your liking.With this product you will no longer be limited by anything and you will choose exactly the size and pitch that you like

Finally, dust-free milling and the perfect milling holder.It is absolutely necessary! The VRS suction and milling holder* is the perfect dust and chip collector. Its added value provides full-width support for your D4R Pro.

Alignment slat, accessory for Clamex P10 joints Dimensions:52x19x7mm Packing (1pc)

• Standing on a ladder for long periods of time can be uncomfortable.
• The work platform is an accessory to the ladder that serves as a comfortable standing platform or tool holder.
• Enjoy the comfort of standing on a sturdy platform rather than a ladder rung.
• The work platform is a versatile accessory that is compatible with many of our multi-purpose ladders.

• The AirDeck® Workstation is a multi-purpose organizer and handle designed for your Little Giant® Leveler PRO ladder that can make your job easier.
• By using the organizer as a handrail, you can maintain three points of contact on the ladder.
• With its slots, grooves and recesses, the AirDeck is perfectly designed as an organizer for tools, paints and other materials.
• Load capacity up to 11.5kg.

With the trestle brackets, you can easily convert your Little Giant® ladder into two safe goats to support the scaffold platform.

With the trestle brackets, you can easily convert your Little Giant® ladder into two safe goats to support the scaffold platform.

A ballistic nylon and steel tool bag that attaches to your ladder and keeps your tools close at hand. It can be placed between the ladder rungs and stored together with the ladder.

You no longer have to worry about obstacles such as windows.

• The Little Giant® WingSpan™ Wall Stand rests around windows and other obstructions such as rain gutters, etc.
• WingSpan has a fixed width of 127 cm with a 30 cm spacing.
• WingSpan is made of durable aluminum and is lightweight and easy to attach to most Little Giant aluminum and fiberglass articulating ladders.

Leg leveler, accessory for articulated extension ladders.

This leveling leg will help you safely use your ladder on any terrain, such as a slope, spiral staircase, or otherwise uneven ground.

Adjustment to the ideal plane for leaning the ladder is quick and easy. This saves a lot of time for the actual work and increases safety on the ladder.

Wall Mount Ladder Rack™

• If your ladder is not stored properly, it can become dangerous. An unsecured ladder can cause personal injury, ladder damage or other property damage by falling, tipping or sliding.
• Therefore, make sure that your ladder is stored safely.
• The holder has a load capacity of up to 34 kg.

Leg leveler, accessory for articulated extension ladders.

This leveling leg will help you safely use your ladder on any terrain, such as a slope, spiral staircase, or otherwise uneven ground.

Adjustment to the ideal plane for leaning the ladder is quick and easy. This saves a lot of time for the actual work and increases safety on the ladder.

• Tool and equipment organiser, accessories for articulated extension ladders

Imagine that every step you take at work is not only safe, but also incredibly comfortable. That's exactly what the Jumbo Step™ from Little Giant® offers - a folding step that will change the way you think about working at heights.

Multi-purpose tool and material organiser with non-slip pads for supporting ladders in internal corners, external corners, walls and uprights.

MAFELL ErgoBalance Concept:

• The cordless drilling screwdriver A 12 is optimally balanced thanks to a precise centre of gravity analysis.
• Small, ergonomic, extremely powerful.

Possibility to test the demonstration machine at our shop.

Patented adjustment system with spring-loaded pins in the base plate. Proven double-hole technology prevents workpieces from turning against each other.

• As the world's first circular saw with bottom pull, ERIKA has been a symbol of mobile cutting since its introduction. After almost 40 years of experience, the current generation is now equipped with everything users need and expect from a modern circular saw with bottom pull.

The NFU 50 grooving machine can be used flexibly and is versatile for various types of milling in wooden structures. Extensive special accessories expand the possibilities of use in everyday work.

The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.

The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.

• The bright LED lights allow for large-scale illumination of the work area.

The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.

without batteries and charger

The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.

The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.

Do not hesitate to contact us and arrange a demonstration of the machine at your workplace.

Especially the MAFELL CUnex precision slice enables uniquely precise cuts thanks to its newly designed form.

Possibility to rent a test machine!!

Action + rail F 160

The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines, including 160cm guide rail

For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.

For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.

For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.

For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.

The EVA 150 eccentric grinder offers you a 20% higher speed compared to other eccentric grinders. This increases performance and productivity.

The EVA 150/5 eccentric grinder offers you 20% higher speed and thus a high material removal rate. Especially suitable for large areas in woodworking.

• Cuts according to the line. The cut indicator moves automatically with the set angle.
• The cutting depth can be adjusted and locked with just one lever.

Multifunctional milling machine MF 26 cc: one machine - 5 options.

Version with adjustable cutter for 15,4-25mm grooves in transport case and drip rail.

Multifunctional plasterboard milling machine. Thanks to the very simple and precise adjustment, you can mill a " V " groove for folding corners.

The best machine for grooving, cutting and bending composite boards (dibond, skybond etc.)

With this router you will achieve excellent results with materials such as: solid wood, MDF, plasterboard, aluminium composite boards, sandwich materials (skybond, dibond). Folding corners in aluminium composite panels.