Wood Cutters

Wood shank milling cutters are designed for use in top milling machines or CNC machines. Here you will find slot, angle and razor cutters.

42 items total
IGM F041 Drážkovací žiletková fréza  (Fréza F 041 D10x30 L80 S=12 HM)
from 1 536 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04108081
IGM F463 | Stopková fréza na velké plochy
2 191 Kč / pcs

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

Code: F46300421
IGM F463  Mini Stopková fréza na plochy
from 1 492 Kč / pcs

Surface milling cutters are ideal for fast feed and large material removal rates.

Code: F46300781
IGM F043 Ořezávací žiletková fréza s ložiskem  (Fréza F 043 D19x30 L85 S=12,7 HM)
from 1 200 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Code: F04319381
IGM F043 Drážkovací žiletková fréza (Varianta frézy D19x12 L45 S=8 HM)
1 160 Kč / pcs

Milling machine designed for precision face milling.

Code: F04319181
IGM F043 Ořezávací žiletková fréza se 2 ložisky  (Fréza F 043 D19x50 2B19 L110 S=12 HM)
from 1 467 Kč / pcs

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

Code: F04319481
IGM F043 Ořezávací žiletková fréza s ložiskem  (Fréza F 043 D19x50 L112 S=12,7 HM)
1 452 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

Code: F04319521
IGM F044 Drážkovací fréza se zavrtávací žiletkou  (Fréza F 044 D16x48,3 L111 S=12 HM)
IGM F044 Grooving cutter with drilling blade
In stock at the supplier, we ship within 72 hours.
from 1 843 Kč / pcs

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Code: F04416321
IGM F045 Drážkovací žiletková fréza  (Fréza F 045 D16x48,3 L105 S=12 HM)
from 1 938 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516321
IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)
from 1 693 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519381
IGM F046 Úhlová žiletková fréza HW  (Fréza F 046 45° D29x8 L52 S=6)
1 110 Kč / pcs

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

Code: F04645081
IGM F047 Drážkovací žiletková fréza  (Fréza F047 D12,7x29,5 L89 S=12,7 HM)
from 1 247 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04712381
IGM F050 Ořezávací žiletková fréza HM na lamino (Fréza F 050 D19x49,5 B19 L100 S=12,7)
1 730 Kč / pcs

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

Code: F05019521
IGM F051 Žiletková fréza HW na V drážku  (Fréza F 051 90° D23x11 L60 S=6,35)
607 Kč / pcs

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

Code: F05123081
IGM F062 Radiusová žiletková fréza HW  (Fréza F 062 R2 D27x3 L57,5 S=8)
from 1 708 Kč / pcs

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.


The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Code: F06202081
c174 177 drazkovaci frezy se zavrtnym zubem 2 web
CMT C174 Grooving cutter
In stock (1 pcs)
from 625 Kč / pcs

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

Code: C17408011
c822 talirove frezy 1 web
CMT C822 Disc cutters
In stock (1 pcs)
from 538 Kč / pcs

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.

Use type 3 (without copy bearing) 4B (with copy bearing).

Code: C82232011
CMT C924 Trn talířové frézy bez ložiska (Varianta frézy S=12)
374 Kč / pcs

Spines for plate cutters.

Code: C92408000
CMT C924 Trn talířové frézy, upnutí matkou s ložiskem  (Varianta frézy S=12)
from 492 Kč / pcs

Mandrels for disc milling machines without countersinking with bearing

Code: C92408010
CMT C935 Falcovací fréza na polodrážku  (Varianta frézy H9,5 D31,7x19 S=8 HM)
from 913 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93531711
CMT C915 Fréza na V drážku 90°  (Varianta frézy D16x12,7 90° S=8 HM)
from 702 Kč / pcs

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

Code: C91512711
CMT C936 Úhlová fréza s ložiskem  (Fréza C 936 45° D45x18 S=8 HM)
from 800 Kč / pcs

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.


Code: C93613011
CMT C938 Zaoblovací fréza vydutá (Fréza C 938 R3 D18,7x12,7 S=8 HW, Delrin)
from 825 Kč / pcs

- Tool body made of premium steel.
- HM carbide blades.

Code: C93816011
C24000404 01 web
CMT - a disc for tinfoil
In stock (1 pcs)
2 746 Kč / pcs

CMT Disc for discs D100x8 d22 Z4 R30 HM

Resins, knots and other unsightly wood defects are no longer a problem. The incisions are virtually invisible thanks to the fit of the clearance boats.

Code: C24000404
CMT C706 Ořezávací fréza, šikmé zuby  (Varianta frézy D19x25,4 B19 S=6 HM)
from 1 117 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90619111
c906s orezavaci frezy sikme zuby s loziskem 1 web
CMT - C906 Trimming cutter, angled teeth
In stock at the supplier, we ship within 72 hours.
from 1 102 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90669111
CMT C706 Ořezávací fréza, rovné zuby (Varianta frézy D12,7x25,4 L70,7 S=6 HM)
from 726 Kč / pcs
  • for trimming even the most difficult parts according to the template
  • HW carbide cutting edges
  • copy bearing on the cutter face
Code: C90609611
CMT | Lamelovací kotouč  D100x3,96 d22 Z6 HW střídavý zub
669 Kč –4 %
CMT - lamella disc
In stock (1 pcs)
636 Kč / pcs

Laminating disc for laminated joints - D100x3,96 d22 Z6 HM alternating tooth

Code: C24000604
CMT C935 Falcovací sada na polodrážku   (Varianta frézy H0-12,7 D34,9x12,7 S=8 HM)
2 173 Kč / pcs

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.


Code: C93500111
C95500911 web 02
from 2 265 Kč / pcs

Milling machine for making corner joints or continuous joints for gluing.

Code: C95500911
IGM F042 HW Angle Knife Cutter (Cutter F042 45° D29x8 L60 S=8)
1 359 Kč –4 %
1 302 Kč / pcs
IGM F042 HW Angle Knife Cutter – 45° D29x8 L60 S=8 The angle knife cutter is designed for precise trimming and edge chamfering at a 45° angle. Thanks to the integrated guide bearing, it is ideal for manual routing, allowing easy tool guidance along the workpiece and ensuring consistent results.
Code: F042-45081
ITA Tools | DT1 – Diamantová fréza s rovným zubem Z1
3 766 Kč –5 %
3 577 Kč / pcs

ITA DT1 Diamond Cutter – with Straight Tooth Z1 (D=6 mm, Cutting Length=12 mm, Shank=6 mm) ITA DT1 diamond cutter is a high-performance CNC tool designed for precise groove milling in solid wood, MDF, HPL, HDF, and other materials. Featuring a single full diamond tooth and a body made of solid carbide HW with a hardness of 93.8 HRA, this tool offers exceptional cutting precision, long lifespan, and the ability to be resharpened 3-4 times. It is an ideal choice for professionals requiring a reliable and efficient tool for demanding woodworking tasks, whether on CNC machines or handheld routers.

Code: DT1.06.012.06.0MR
ITA Tools | DT1 – Diamond Straight-Tooth Cutter Z1
2 175 Kč –5 %
2 066 Kč / pcs

The ITA DTA Z1+1 diamond cutter is a top-tier tool (D=10 mm, cutting length=25 mm, shank 12×40 mm) designed for precision machining of materials such as solid wood, HPL, MDF, HDF, and laminated particle boards. It is ideal for grooving and template copying. Thanks to its innovative configuration of 3 spirally arranged PCD teeth along with one HM cutting edge and a robust body, it ensures maximum cutting quality, long service life, and operational reliability.

Code: DTA.10.025.12.0SR
ITA Tools | DTA – Diamantová fréza ø 12,7mm/44mm Z3 s ložiskem DTA.12.044.12.BSR
3 355 Kč –5 %
3 187 Kč / pcs

ITA DTA.BSR – Diamond Router with Bottom Bearing Z1+1 (D=12.70 mm, Cutting Length=44 mm, Shank Size=12 mm) is a premium diamond tool designed for precise joining and routing of wood-based materials such as particle boards, MDF, HPL, and other composites. The special bottom bearing allows working with a template, significantly expanding the tool's versatility. The tool is equipped with a single solid PCD cutter, distributed into three spiral-arranged cutting edges. The body of the router, made from stainless steel (STAINLESS STEEL) with a hardness of 32 HRC or from carbide, ensures high strength and long service life. Dynamic balancing with a tolerance of G2.5 minimizes vibrations and reduces noise during operation, while the option for repeated sharpening (2–3 times) contributes to economic efficiency.

Code: DTA.12.027.12.BSR
ITA Tools | DTA – Diamantová fréza ø 12mm/45mm Z 5+1 DTA.12.045.12.0SR
3 625 Kč –5 %
3 443 Kč / pcs

DIA Z 5+1 Router – Diamond Router (D=12 mm, Cutting Length=45 mm, Shank=12×40 mm) is a top-quality tool designed for precise jointing of kitchen countertops, grooving, and profiling of solid wood, HPL, MDF, HDF, and laminated particleboard. The tool is ideal not only for drilling and formatting materials, but also for complex woodworking operations. Thanks to spiral-arranged diamond teeth (5PCD+1HM), it achieves maximum cutting quality, long service life, and reliability. 

Code: DTA.12.045.12.0SRE
ITA Tools | DTA – Diamantová fréza ø 18mm/45mm Z 5+1 DTA.18.045.20.0SR
3 443 Kč –5 %
ITA Tools | DTA – Diamond cutter ø 18mm/45mm Z 5+1
In stock at the supplier, availability within 7 days
3 270 Kč / pcs

DIA Z 5+1 Router – Diamond Router (D=18 mm, Cutting Length=45 mm, Shank=20 mm) is a top-quality tool designed for precise jointing of kitchen countertops, grooving, and profiling of solid wood, HPL, MDF, HDF, and laminated particleboard. The tool is ideal not only for drilling and formatting materials, but also for complex woodworking operations. Thanks to spiral-arranged diamond teeth (5PCD+1HM), it achieves maximum cutting quality, long service life, and reliability. 

Code: DTA.18.045.20.0SR
ITA Tools | DTA – Diamantová fréza EC 3 spirálová
2 175 Kč –5 %
2 066 Kč / pcs

ITA DTA Z1+1 Diamond Router (D=12 mm, Cutting Length=25 mm, Shank=12 mm) is the ideal choice for demanding woodworking applications, grooving, profiling, and cutting various materials such as solid wood, HPL, MDF, HDF, and laminated particleboard. The router body is made from stainless steel (STAINLESS STEEL), and with a right-hand rotation (RH) and an innovative configuration of 3 spiral-arranged PCD teeth with a single carbide cutting edge, it achieves maximum cutting quality, long service life, and reliability in operation.

Code: DTA.12.025.12.0SR
ITA Tools | Spirálová fréza ø 6mm/32mm Z3
993 Kč –5 %
ITA Tools | Spiral cutter ø 6mm/32mm Z3
In stock at the supplier, availability within 7 days
943 Kč / pcs

ITA Tools Spiral Router – Roughing (D=6 mm, Cutting Length=32 mm, Shank=6 mm, Z3, RH, Positive). The ITA Tools Spiral Router is a highly effective roughing tool designed for fast and precise machining of materials. Thanks to its unique spiral geometry with three cutting teeth (Z3) and a positive profile, it is ideal for applications where large amounts of material need to be efficiently removed. Perfect for roughing operations on materials such as solid wood, composites, MDF, and other particleboard materials.

Code: SF01.06.032.070.06R
ITA Tools | Spirálová dokončovací fréza ø 8mm/32mm Z2 SB01.08.032.080.08R
912 Kč –5 %
866 Kč / pcs

Spiral Router by ITA TOOLS (D=8 mm, Cutting Length=32 mm, Shank=8 mm). This precision tool is designed for cutting and milling solid wood, especially for grooving and profiling shapes. Thanks to the two spiral-arranged cutting edges made from premium carbide (VHM), the tool ensures perfect accuracy and an aesthetically smooth cut surface. The intelligent chip removal system directs chips upwards, keeping the workspace clean and contributing to reliable machining.

Code: SB01.08.032.080.08R
ITA Tools | Spirálová dokončovací fréza ø 12mm/52mm Z3 SC01.12.052.100.12R
2 153 Kč –5 %
2 045 Kč / pcs

Spiral Router by ITA TOOLS (D=12 mm, Cutting Length=52 mm, Shank=12 mm). This precision tool is designed for cutting and milling solid wood, especially for grooving and profiling shapes. Thanks to the two spiral-arranged cutting edges made from premium carbide (VHM), the tool ensures perfect accuracy and an aesthetically smooth cut surface. The intelligent chip removal system directs chips upwards, keeping the workspace clean and contributing to reliable machining.

Code: SC01.12.052.100.12R
ITA Tools | Spirálová drážkovací fréza pozitiv/negativ ø 8mm/32mm Z2+2 SM01.08.032.080.08r
1 498 Kč –5 %
ITA Tools | Spiral groove cutter positive/negative ø 8mm/32mm Z2+2
In stock at the supplier, availability within 7 days
1 423 Kč / pcs

Positive/Negative Grooving Spiral Router for CNC Machines (D=8 mm, Cutting Length=32 mm, Shank=8 mm) is a highly precise tool designed for cutting and milling solid wood, wood-based materials, plastic, and aluminum. This product is an ideal choice for CNC machines, where stability and maximum cut quality are required. Thanks to the innovative design with a pair of spiral-arranged cutting edges (2+2), the router ensures precise cut quality on both the top and bottom sides.

Code: SM01.08.032.080.08R
ITA Tools | Spirálová hrubovací fréza ø 12mm/52mm Z3 SF01.12.052.100.12R
2 381 Kč –5 %
2 261 Kč / pcs

ITA Tools Spiral Router – Roughing (D=12 mm, Cutting Length=52 mm, Shank=12 mm, Z3, RH, Positive). Precision finishing operations with high efficiency and versatile use. Thanks to the three spiral cutting edges and the ability to operate in right-hand rotation mode, it ensures smooth and clean cuts, minimal formation of cracks and burrs, significantly reducing the need for additional finishing. The intelligent chip removal system directs chips upwards, keeping the workspace clean, while the high feed rate on securely clamped workpieces ensures safety and work stability.

Code: SF01.12.052.100.12R